Air Cleaner

Product Details:

Amongst the chief organizations of this domain, we are occupied in providing Bio Safety Cabinet  to our clients, which is highly demanded in the market.

Product Details:

Smart Flow Design: Eliminates the need of manual damper by offering the automatic and dynamic balance between the air inflow and down flow at all time in operation. This is achieved by incorporating two brushless, electronically commutated DC blowers. The speed of DC blowers can be monitored and controlled precisely in real time to the last RPM. This makes possible to operate such DC motors optimally to provide energy efficiency in operation and consequently dissipate less heat to lab ambient when compared to a conventional induction AC blower motor.

These DC blowers have their control electronics and are therefore always fed with the intelligence on the variation (drop) in differential pressure across supply and exhaust HEPA filters. This drop is differential pressure is caused due the resistance offered by filter loading to the air flowing across them.

Armed with these intelligences the smart algorithms of DC blowers adjust the motor torque and rpm to ensure the air flows at constant velocities across loaded HEPA filters even if the line voltage fluctuates.

While the primary blower maintain constantIn flow velocity at all time the secondary blower eliminates the need for manual damper and ensure that the down flow air across supply HEPA filter is maintained at constant down flow velocity and thereby eliminates the need of conventional way of manually adjusting the damper to achieve right division between inflow / exhaust and down flow air volumes.

Digital Airflow Verification System (DAVe): The system uses differential pressure sensors to monitors drops in pressure across Supply and Exhaust HEPA filters. If this drop in differential pressure is more than 20% of initial value (when the filters are new), DAVe alerts the users using audible and visual signals indicating that the filters are chocked beyond safe limits and also stop both the blowers.

Smart Flow Indicator: Visually demonstrate the users using colours (Green, Yellow and Red) the power and capacity of filters to maintain protection.

Comfort

• Low Noise Levels enhances user focus
• 10??? Sloped front for exceptional comfort and ergonomics
• Spacious work area with comfortable arm rests
• Increased Light Intensity for a brighter work environment

Convenience

• Smart Clean front window design allows the user to reach the interior surface with ease by sliding the sash below the work table height.
• Intuitive Control Panel displays safety and real time performance data like Inflow and Down flow air velocities, Hours of Operation, Filter status, Safe Window position, deviation in airflow velocities, Reduced energy operation activation, UV light indicator and activation, activating the power receptacles, Fluorescent light activation.
• Smart Port This NSF certified port facilitates routing of tubing and cables through negatively pressurised side wall without compromising containment.
• Programmable UV light extends the bulb life and Saves Energy.

Reduced Flow Mode: Intelligent speed control automatically reduces the blower speed when front sash is closed. Continuous airflow maintains a sterile working environment, even when cabinet is not in use. Less airflow through HEPA extends filter life and decreases energy consumption and heat dissipation.

Product Details:

Features

• Humidity & Temperature Controlled by Microprocessor based PID Controller.
• Inner Chamber Stainless Steel 304 grade
• Outer Body Stainless Steel 304 grade
• Full length inner glass door or door window for visual inspection during temperature process to prevent the temp disturbance.
• Air fans for forced air circulation fitted at rear wall of the chamber to maintain temperature uniformity in the chamber.
• Lock & Key arrangement, Lockable Caster wheel mounted cabinet.
• The inner chamber is properly insulated with Special Grade Glass wool to prevent thermal losses.
• Door operated LED light system inside the chamber.
• Main Panel consists of Switches for Mains and Heater, Temperature and Humidity Controller.
• Water Reservoir for Humidity:-Each chamber has stainless steel water reservoir at the bottom and water is heated by low wattage immersion heater which assures to maintain humidity from atmospheric humidity up to 95% with a sensitivity

Product Details:

Biosafety cabinets, also known as biological safety cabinets, are enclosed, ventilated laboratory workspace areas designed to protect the user and surrounding environment from pathogens. All exhaust air is HEPA filtered to remove hazardous agents such as viruses and bacteria.

Product Details:

The Class I Biological Safety Cabinet (BSC) provides personnel and environmental protection, but no product protection. It is similar in air movement to a chemical fume hood, but usually has a limited fixed work access opening and the exhaust air must be HEPA filtered, to protect the environment.

Product Details:

Class II Biosafety Cabinets (B3 Biohazard Safety Cabinets Type A2) provide personnel, product, and environment protection. Class II Cabinets differ in the proportion as 70% air is re-circulated within the cabinet through high efficiency particulate air (HEPA) filtration.

Product Details:

With prosperous industry practice, our entity has gained huge appreciation in the market by presenting Air Shower  to our respected patrons.

Product Details:

Fume hoods are equipments that are used to ensure safety for the user as they won’t be exposed to too many hazardous and dangerous fumes. Fume hood capture the fumes/effluents released during any given experiment, contain them in the enclosure and then emit through their well-designed exhaust system.

We specialize in standard and customized fume hood. Fume hoods typically protect only the user, and are most commonly used in laboratories where hazardous or noxious chemicals are released during testing, research, development or teaching. They are also used in industrial applications or other activities where hazardous or noxious vapors, gases or dusts are generated or released.

Applications

• Chemical Laboratories
• Testing and Research

Special Features

• Fully Polycarbonate Construction PP Sheet with thickness of 19mm. (0.75 inch) approx.
• Low noise levels energy efficient mechanism.
• CE marked and NABL certified.
• Floor standing.
• Semi close ventilated exposures.
• Provided with sliding sash made out of special grade shatter proof glass duly framed in wooden/aluminum frame with sliding motion and counter weight balanced mechanism.
• Illumination level of approx. 800 lux on the work table.
• Heavy duty exhaust system, comprising of dynamically balanced centrifugal impeller with high speed motor.
• Suitable ducting of required dimension as per the individual requirements (Optional)
• Microprocessor based controls (Optional) Advanced microprocessor control supervises operation of all hood functions.
• VOC sensor to monitor chemical concentration within the cabinet work zone. (Optional).
• Electrical Outlets: Direct mounted single electrical outlet. (Available in all international socket outlet types. Specify when ordering.)
• Aesthetically Designed-Designed according to the standards and principles underlining industry’s aesthetic values.
• Corrosion Resistant Interior and Exteriors - Corrosion resistant coatings like epoxy coatings are applied inside and outside the fume hoods to prevent against degradation due to moisture, salt spray, oxidation or exposure to a variety of environmental or industrial chemicals/ corrosive agents.
• Energy Efficient – fume hoods uses less energy to provide the same level of performance, comfort and convenience, thus making it energy conserving.
• Sturdy Construction – fume hoods are built with robustness to withstand stress and strain, giving it long life and ability to perform in extreme stress environments.

Product Details:

Laminar flow is defined as airflow in which the entire body of air within a designated space is uniform in both velocity and direction.

Product Details:

Construction all its external & internal surfaces are made S.S. Sheetbody – 304 grade.??? Hinged door on both sides fitted with glass viewing window throughwhich material kept in the pass box can be seen.??? Electrically interlocked type doors on both sides, so that any one doorcan be opened at a time.??? UV & fluorescent light??? HEPA Filter 0.3μ down to 99.97%??? Pre Filter 10μ??? Static pressure Manometer. Statically Balanced motor blowerAssembly.??? Can be installed easily on the wall between the clean room and anyother room.

Product Details:

A laboratory fume hood is a type of ventilation system that primarily functions to provide personnel protection against toxic fumes, vapors and dust. Its secondary function includes protection against chemical spills, runaway reactions and fires by acting as a physical barrier.

Additional Information:

• Item Code: DDLab-265
• Production Capacity: As required
• Delivery Time: 4-5 DAYS
• Packaging Details: Packaging details shall be confirmed during finalization of P.O it will be standard We provide safety, we protect your health. Ambient air purification. Protect people. Environment friendly. Air filtration expert. Types:

Product Details:

The Polypropylene Fume Hoods protect laboratory staff from noxious fumes released by acids, dangerous gas and organic solutions – materials and acids which regular steel hoods may not withstand

Product Details:

Fume Hood are very useful for product and personal protection, reducing odour levels in laboratories & highly recommended for exhaust of toxic gases, acidic/alkaline fumes, chemical vapors etc from the hood working area.

Product Details:

We offer the top range of Vertical Laminar Airflow Cabinet for our valued patrons.

Product Details:

laminar air flow for microbiology, IVF, pharmaceutical, plant tissue

Product Details:

Fume hoods are equipment’s that are used to ensure safety for the user as they won’t be exposed to manyhazardous and dangerous fumes. Fume hood capture the fumes/effluents released during any given experiment, contain themin the enclosure and then emit through their well -designed exhaust system. We specialize in standard andcustomized fume hood. Fume hoods typically protect only the user, and are most commonly used in laboratorieswhere hazardous or noxious chemicals are released during testing, research, development or teaching. They arealso used in industrial applications or other activities where hazardous or anxious vapors, gases or dusts aregenerated or released.

Additional Information:

• Delivery Time: 2-4 week

Product Details:

PASS BOX (STATIC TYPE)600 X 600 X 600mmComplete SSElectrically interlocked type doors on both sides, so thatany one door can be opened at a time

Additional Information:

• Delivery Time: 1-2 WEEK

Product Details:

PASS BOX (STATIC TYPE)600 X 600 X 600mmComplete SSElectrically interlocked type doors on both sides, so thatany one door can be opened at a time

Product Details: